20dBm Lte700+GSM850+PCS1900 Wireless Cell Phone Repeater Moblie Network Booster
Model:
GW-10L7CP, 10dBm
GW-15L7CP, 15dBm
GW-20L7CP, 20dBm
GW-24L7CP, 24dBm
GW-27L7CP, 27dBm
GW-30L7CP, 30dBm
TRI-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Quad-Band Donor Antenna and Service Antenna, Quad-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 500~1000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
* it to get the sample.
Model:
GW-10L7CP, 10dBm
GW-15L7CP, 15dBm
GW-20L7CP, 20dBm
GW-24L7CP, 24dBm
GW-27L7CP, 27dBm
GW-30L7CP, 30dBm
TRI-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Quad-Band Donor Antenna and Service Antenna, Quad-Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 500~1000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
frequency range | Uplink | Downlink | ||
GSM900+DCS1800+3G | 890-915/1710-1785/ 1920-1980 | 935-960/1805-1880/ 2110-2170 | ||
GSM850+PCS1900+LTE2600 | 824-849/1850-1910/ 2500-2570MHz | 869-894/1930-1990/ 2620-2690MHz | ||
LTE700+GSM850+PCS1900 | 777- 787/824 - 849/ 1850-1910MHz | 746- 756/869-894/1930-1990MHz | ||
Max. Gain | 65dB | 70dB | ||
Max. Output Power | 10-15dBm | 10-20dBm | ||
Bandwidth | Wide Band | |||
Manual Gain Control | 31dB / 1dB Step | |||
Automatic Gain Control | >20dB | |||
Ripple in-band | ≤6dB | |||
Return loss | ≤ -10dB | |||
Noise Figure | ≤ 6dB | |||
Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | ||
1~12.75GHz | ≤ -30dBm | |||
WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||
Modulation Accuracy | ≤ 12.5% | |||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | |||
Time Delay | ≤ 1.5 μs | |||
Frequency stability | ≤ 0.01ppm | |||
MTBF | > 50000 hours | |||
Impedance | 50 ohm | |||
Power Supply | Input AC90~264V, | |||
Power LED | Power Indicator | |||
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | |||
Mechanical Specification | ||||
RF Connector | N-Female | |||
Switch | Power Switch\Manual Gain Control Switch | |||
Cooling | Heatsink Convection cooling | |||
Humidity | < 90% | |||
Operating Temperature | -10°C~55°C | |||
Environment Conditions | IP40 | |||
Installation Type | Wall Installation | |||
Size | 250*360*52mm | |||
Weight | < 7Kg |
Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)
Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A. Drill holes in the selected place and install expansion bolts.
B. Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.
Connection:
A. BTS Port: donor antenna cable is connected with Outdoor Port;
B. MS Port: service whip antenna is connected with Indoor Port;
C. DC IN connected with Power adaptor.
Q1.Payment Method
T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please us with more details.
Q2.Delivery Date&Lead Time
Quantity | Lead time | Delivery to American/Middle East/Asia/Europe |
<20 pcs | 3-5 business days | 3-7 business days by DHL 5-7 business days by FedEx/UPS |
20-100 pcs | 7-15 business days | |
>100 pcs | 15-24 business days |
Q3. Can I customize frequencies?
Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.
Q4. What should I do if I don't know about frequency in my country?
Please feel free to us with your inquiry, we will find the frequency you need and address your problems.
More signal repeater please it!