PCS 1900M 20W 95dB Wireless Band Selective RF Signal Amplifier Booster Repeaters
OVERVIEW
Wireless Band Selective Repeaters are cost effective and reliable solutions designed to extend and improve the coverage area of UMTS communication systems. LTE Band Selective Repeaters amplifies in both directions, uplink and downlink a continuous bandwidth, factory tuned. The presence of a Repeater provides to the 4G communication system with a high channel occupancy rate, since coverage is extended beyond site coverage. Typical applications of this line of boosters are indoor situations such as tunnels, buildings, subways, and outdoor scenarios such as stadiums, rural areas and dense urban areas.
RF Specifications
| Item | Specification | Remark | |||
| Up-Link | Down-Link | ||||
| Frequency range | 1850-1910 MHz | 1930-1990 MHz | |||
| Band width (-3dB) | available upon request | ||||
| Output Power | 30-37 dBm(1-5W) | 30-43 dBm(1-20W) | (Customized) | ||
| Nominal Gain | 95±3dB | (Customized) | |||
| Gain Flatness | ≤ 3dB (p-p) | ||||
| MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | ||||
| Max. ALC level | ≥25dB | ||||
| Intermodulation attenuation | ≤-45dBc | ||||
| Spurious emission | 9kHz-1GHz | ≤-36dBm | |||
| 1GHz-12.75GHz | ≤-30dBm | ||||
| Noise Figure. | ≤5dB(at maximum output power) | ||||
| Group delay | ≤5us | ||||
| VSWR | ≤1.5 | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | |||
| Modulation Accuracy | ≤ 12.5% | ||||
| Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | ||||
| Input inter-modulation | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||||
| ACRR | ≥ 30dBc/30KHz @ ± 5MHz ≥ 50dBc/30KHz @ ± 10MHz | ||||
| RF Connectors | N - female | ||||
| Impedance | 50 Ohms | ||||
Supervising Specifications
| Self diagnostic platform | Microprocessor based |
| Alarms | Yes, amplifiers status, power amplifiers status, power supply failure, battery backup failure, temperature, AGC, RF overload, poor antenna isolation. |
| Local management and supervising | Built-in gain adjustment interface and alarms/status LEDs, PC access via RS-232 (OMS) |
| Remote management and supervising | Remote access via wireless GSM SMS modem OR GPRS Modem OR Ethernet, option RC (OMS) |
Application:
Wireless signal repeater is used to expand signal coverage of fill signal blind area where signal is weak or unavailable.
Outdoor: Airports, Golf Courses, Tourism Regions, Villages, Highway, Tunnels, Mining Districts etc.
Indoor: Hotels, Exhibition Centers, Shopping Malls, Gymnasium, Basements, Offices, Factory, Hospital,Entertainment, Packing Lots etc.
Shipping
1. We will send the goods within 10-15 days after full payment has been confirmed, detail shipping time depend on order quantity.
2. Multiple delivery method for selection, by air, by land, by sea or by expression courier.
Company information:
Our company, Quanzhou L-TEL Communication Equipment Co.,Ltd. was founded in 2007, located in the technology economically developed city of Quanzhou, Fujian,China. We are focusing on the development, production and sales of a variety of mobile communication repeaters, signal amplifiers and function modules. We are a professional manufacturer specializing in perfect solutions for wireless signal coverage for a variety of occasions.
Our present manufacturing service:
1) GSM/CDMA/WCDMA/IDEN/DCS/PCS/LTE/TETRA/DMR/VHF/UHF and other Repeaters (PICO Repeater/ Dual band Repeater/ Fiber Optical repeater/ Band or frequency selective repeater/ Frequency Shifting repeater) and series Trunk Amplifiers.
2) Functional Units: Low-noise Power Amplifier Integrative Module, Low-noise Band Selective Power Amplifier Integrative Module, Power Amplifier, Low-noise Amplifier, Channelized Device, Band Selective Device, Band Selective Frequency Shifting Device.
3) All kinds of accessories: Antenna/ Filter/Power divider/Connector/ Cable/Coupler/Combiner/Duplexer.
4) OEM/ ODM is available.
For more informations,please feel free to contact with us!!!