2021 New GSM Alarm System with WiFi+ GSM Dual Network (ES-X9)

Wired Wireless WIFI + GSM Alarm System with Touch keyboardFeaturesTouch screen, LED displayDual network, WIFI+GSMControl the system locally or remotely based on ICloud network technology. Alarm, fault, status push function. A

Featured Products

Wired Wireless WIFI + GSM Alarm System with Touch keyboard

Touch screen, LED display
Dual network, WIFI+GSM
Control the system locally or remotely based on ICloud network technology. Alarm, fault, status push function. 
Alarm by Voice Call, SMS, Status notification
One key match the WIFI password of the host, can connect the network.
Perpetual calendar + 5 user alarm number + 1 network center number + 1 SMS alarm number + alarm record message + delay arm + delay alarm + different zone different alarm voice + promot tone + incoming call time setting + wireless learning + defense zone nature setting + network center setting + user password + coding password + factory reset + 100 alarm log
 24 wireless defense zones, 4 wired zones, each zone can be customed to: start zone close switch, alarm delay switch, zone tone, intelligent door sensor function
 Alarm SMS: zone and events
Events: arm/ disarm/ low battery/ communication fault&recovery/ disconnected line/ sensors low voltage/ sensors fault
Support CID. (upload center: alarm information, arm/disarm, low battery, communication fault&recovery, hand testing, period, sensors low voltage)
Arm mode: away arm& home arm, can be armed/disarmed by remote control, host keypad, remote call/SMS, wireless keypad
RFID function, can learn 4 zone RFID, 
Intelligent door sensor function, can inform door/window is open or close
Zones tune function
User alarm leave message
One button sos alarm
Manual dial, can be 2 way communication
Alarm linkage relay output 
Monitoring or voice talk, listening alarm recoring by receiving alarm calls and remote call local number 
Support timing arm/disarm weekly.
Support wireless picture viceo device, wireless siren, wireless keypad
Ding-dong function
Factory reset
Support IOS&Android APP
Support APP/ Keypad control 8 way wireless appliances, need wireless socket or other control receive device.
Support arm status 12V voltage output port
Support SMS status 12V voltage output port

 Technical parameters:

Power supply: input: 100~240V, output: 12VDC
Static current: <70mA (when not in charging, not including wired sensors)
Alarm current: <180mA (not including wired siren)
GSM transimission power: 2W
WIFI Frequency: 2.4G, 
WIFI min receiving sensitivity: -96dbm, transimission power: 18dbm Double GSM: 900/1800 (can choose Quad band : 850/900/1800/1900)
Back-up battery: NI-HI 800MA/H, DC3.7V.   Standby: >8hours, charging: 12 hours full
868/433MHz receiving distance: >100m (open area)
868/433MHz transimiting distance: >100m (open area) Working temperature,  -10ºC ~ 70ºCrelative humidity: 5%~95% 

Fire alarm system, smoke alarm system, burglar alarm system, emergency alarm system, intruder alarm system, home alarm system, intruder alarm system, security system, alarm system, sensors are on sales, etc.
No.StatusHow is the beep ( System beep notification)
1Arm DelayOne Di every second in Delay
2Alarm DelayOne Di every second in Delay
3ArmOne Di
4DisarmTwo Di
5Landline is offTwo Di every 30 seconds <Cut Wire Alarm setting should be enabled >
6AC is OFF / AC is ONOne Di
7Sensor is in low voltage statusOne Di
8Sensor is triggered in disarm statusContinuous Five Di <In Alarm Time setting, Arm/Disarm Beep should be ON>
9Arm system when door/window opensContinuous Four Di<In Smart Zone setting, Activate of corresponding zone should be ON; In Zone Attribute setting, Zone function of corresponding zone should be ON>

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours