Triple Band Fiber Optic Repeater
The Triple Band Fiber Optic Repeater is designed to solve problems of weak mobile signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.
The system consists of two parts: Donor Unit and Remote Unit. The Donor unit captures the BTS signal via Donor antenna to BTS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
The Triple Band Fiber Optic Repeater is designed to solve problems of weak mobile signal in the place that is far away from the Base Transceiver Station (BTS) and has fiber optic cable network underground.
The system consists of two parts: Donor Unit and Remote Unit. The Donor unit captures the BTS signal via Donor antenna to BTS, then converts it into optic signal and transmits the amplified signal to the Remote Unit via fiber optic cable. The Remote unit will reconvert the optic signal into RF signal and provide the signal to the areas where network coverage is inadequate. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.
- Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding
- Omni-directional antenna can be adopted to expand more coverage
- Tx/Rx control and alarm messages can be transmitted via one fiber optic cable
- Adopting WDM module to realize long-distance transmission
- Stable and improved signal transmission quality
- One Donor Unit can support up to 4 Remote Units to maximize utilization of fiber optic cable
- USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater
| Items | LTE | AWS | |||
| Working Frequency (customized) | Uplink | 885~895MHz/2500~2520MHz | 1935~1940MHz | ||
| Downlink | 930~940MHz/2620~2640MHz | 2125~2130MHz | |||
| Working Bandwidth | 10MHz/20MHz | 5MHz | |||
| Gain | >=50dB(System gain) | ||||
| Gain Adjustment Range | 1~31dB @ step of 1 dB | ||||
| Output Power (customized) | Master Unit | 0dBm(UL) | 0dBm(UL) | ||
| Remote Unit | 40dBm(DL) | 40dBm(DL) | |||
| Maximum Input Power(no damage) | UL>= 0dBm DL>=10dBm | ||||
| Voltage Standing Wave Ratio | < 1.5 | ||||
| Error Vector Magnitude (EVM) | ≤ 8% | ≤ 12.5% | |||
| Peak Code Domain Error (PCDE) | ≤ -35dBm | ≤ -35dBm | |||
| Noise Figure | ≤ 5dB(uplink only) | ||||
| In-band Ripple | ≤±3dB | ≤±3dB@3.84MHz | |||
| System Delay | ≤ 1.5μSec | ||||
| Spurious Emission | Comply with 3GPP TS 25.106 V6.0.0 | ||||
| I/O Impedance | 50Ω | ||||
| Optical Fiber | Single Mode | ||||
| Optical Wavelength | 1310nm,1550nm +WDM | ||||
| Fiber Connector | Master unit:4 x FC/APC, Remote unit:1xFC/PC | ||||
| RF Connector for Master Unit | 3*N Female(BTS Port) | ||||
| RF Connector for Remote Unit | 1*N-Female(MS Port) | ||||
| ALC Control | Supported | ||||
| Temperature Range | Operation: -25°C ~ + 55°C / Storage: -30°C ~ +60°C | ||||
| Relative Humidity Range | ≤ 95% (non condensing) | ||||
| Power Supply (customized) | DC-48V or AC110, AC220V, 50/60Hz | ||||
| Backup Power Supply (optional) | 4 hours | ||||
| Dimensions | Master Unit: 437*250*88mm; Remote Unit: 500*440*235mm | ||||
| Weight | Master Unit: 15kg / Remote Unit: 40Kg | ||||
| Control Connector | LAN/USB for local / remote (SNMP Support) | ||||
| NMS Monitoring Function (optional) | Real-time alarm for door status, temperature, power supply, VSWR, etc; Remote control such as turn on/off, increasing/decreasing output power, etc; Real-time status for output/input power, UL/DL gain, all status of repeater etc. | ||||
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
| Outdoor: | Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, … |
| Indoor: | Hotels, exhibition centers, basements, shopping malls, offices, parking lots, … |