GSM repeater tri band 850/1900/2100mhz cellphone booster 2g 3g 4g signal amplifier
Why do you need to buy repeater/booster ?
Unfortunately,there are still no signal in some places,for example:
-Parking lots,tunnels
-Big store
-Car,boats,office building
-House in remote area
What will be changed when using this products??
1 A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band;
2 No more dropped calls! No more poor reception;
3 No more running to the windows or going outside to talk on your mobile phone;
4 Now you can reach everywhere with signal boosters;
Specification:
Electrical specification | Uplink | Downlink | ||
Frequency Range | CDMA 850mhz | 824 ~ 849 MHz | 869~ 894MHz | |
4G 2600mhz | 2500 ~ 2570 MHz | 2620 ~ 2690 MHz | ||
PCS 1900mhz | 1850-1910MHz | 1930-1990MHz | ||
Max .Gain | ≥ 70dB | ≥ 75dB | ||
Max .Output Power | ≥ 24dBm | ≥ 27dBm | ||
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step | |||
Automatic Level Control | ≥ 20dB | |||
Gain Flatness | GSM & CDMA | Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) | ||
WCDMA | ≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) | |||
Noise Figure | ≤ 4dB | |||
VSWR | ≤ 2.0 | |||
Group Delay | ≤ 1.5μs | |||
Frequency stability | ≤ 0.01ppm | |||
Spurious Emission & | GSM Meet ETSI TS 151 026 V 6.1.0 | |||
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||||
CDMA Meet IS95 & CDMA2000 | ||||
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||
Modulation Accuracy | ≤ 12.5% | |||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | |||
CDMA System | Rho | ρ > 0.980 | ||
ACPR | Meet IS95 & CDMA2000 | |||
Mechanical Specifications | Standard | |||
I /O Port | N-Female | |||
Impedance | 50 ohm | |||
Operating Temperature | -25ºC~+55ºC | |||
Environment Conditions | IP40 | |||
Dimensions | 220x320x40mm | |||
Weight | ≤ 3.50Kg | |||
Power Supply | Input AC90-264V,output DC 5V / 6A | |||
LED Alarm | Standard | |||
Power LED | Power Indicator | |||
UL LED | Be lighted when there is phone calling | |||
DL 1 | Be lighted when Outdoor signal is -65dB | |||
DL 2 | Be lighted when Outdoor signal only -55dB | |||
DL 3 | Be lighted when Outdoor signal only -50dB |
Manual Gain Control (MGC)
Switches 1-5 represent Downlink and 6-10 represent Uplink. When it is necessary to adjust the gain by DIP switch, firstly please adjust Downlink gain according to input signals, secondly please adjust Uplink gain according to Downlink gain.
The DIP Switches have default 'OFF' status; please push relevant switches to "ON" position if certain attenuation value needs to be achieved.
l DIP switch downlink attenuation setting:
Att | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 | Att. | 1 | 2 | 3 | 4 | 5 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON |
l DIP switch uplink attenuation setting:
Att | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 | Att. | 6 | 7 | 8 | 9 | 10 |
0 dB | off | off | off | off | off | 11dB | ON | ON | off | ON | off | 22dB | off | ON | ON | off | ON |
1 dB | ON | off | off | off | off | 12dB | off | off | ON | ON | off | 23dB | ON | ON | ON | off | ON |
2 dB | off | ON | off | off | off | 13dB | ON | off | ON | ON | off | 24dB | off | off | off | ON | ON |
3 dB | ON | ON | off | off | off | 14dB | off | ON | ON | ON | off | 25dB | ON | off | off | ON | ON |
4 dB | off | off | ON | off | off | 15dB | ON | ON | ON | ON | off | 26dB | off | ON | off | ON | ON |
5 dB | ON | off | ON | off | off | 16dB | off | off | off | off | ON | 27dB | ON | ON | off | ON | ON |
6 dB | off | ON | ON | off | off | 17dB | ON | off | off | off | ON | 28dB | off | off | ON | ON | ON |
7 dB | ON | ON | ON | off | off | 18dB | off | ON | off | off | ON | 29dB | ON | off | ON | ON | ON |
8 dB | off | off | off | ON | off | 19dB | ON | ON | off | off | ON | 30dB | off | ON | ON | ON | ON |
9 dB | ON | off | off | ON | off | 20dB | off | off | ON | off | ON | 31dB | ON | ON | ON | ON | ON |
10 dB | off | ON | off | ON | off | 21dB | ON | off | ON | off | ON |
Packaging & Shipping
Cell phone signal booster/ repeater full kit:
1. 1pcs main unit repeater
2. 1pcs ourdoor antenna
3. 1pcs or more indoor antenna
4. 10 meters +5 meters cables
5. power supply
1. UPS / DHL / EMS / HK EMS / FEDEX / HK post / TNT and so on express(door to door)
2. For Air Shipment, Please choose your favorite, shipping method according your detail requirement
3. The shipping discount is different in different seasons and depend different weight, we will choose the cheapest and safest way according your detail quantities
4. Normally, it will take around 3-7days from China to destination country. Please note that some remote place will need 1-3 days more
No. | Name | Specification | Quantity | Remark |
1 | Plastic Expansion Bolt | M5*24 | 6 | Standard accessories |
2 | Tapping screw | M3*27 | 4 | Standard accessories |
3 | Hanging folder | 1 | Standard accessories | |
4 | reciprocating drill | 1 | Engineering-owned, punch the wall | |
5 | Shot bit | M3 | 1 | Engineering-owned, punch the wall |
Of course there are still a few more things to consider but in general, this is the basic procedure. For more information, please contact us.
Warranty:
1. 2 years warranty for the products.
2. Please send back the defective goods which are within the warranty period, we will repair them or send you new one for free
3. If it is the sample or only few pcs accessories (the fee is less or around shipping fee) are damaged, please send us some pictures and video about it need to confirm your problem, then we will send you free new goods instead
Shenzhen Sai Tong Tian Electronic Technology Company Limited is located in the well-known high-tech city, Shenzhen of china, founded in January 2007. We are specialized in manufacturing communication products including Signal Repeater/booster/amplifier ,antenna and all the related accessories .
We mainly provide mobile signal repeater,TMA,TMB (tower mounted amplifier/booster),booster,and antennas of GSM,CDMA,DCS,WCDMA/3G,4G LTE FDD .We obtained ISO9001, CE and RoHS certificates and all of our products are strictly tested by QC department.
And with the high speed development for about 6 years, Shenzhen Sai Tong Tian has exported nearly 90% products to over 50 countries, such as Western Europe, South America, Southeast Asia, Middle East and Africa.
For many years, we keep our enterprise faith "Be honest people, Do best thing" and have best service and best products for our customers. We are always working hard, and sincerely hope to create the beautiful future together with you.