Sunhans Outdoor 2.4GHz 10dBi 10W 3G 4G WiFi Mobile Signal Booster Antenna for Home
Feature:
Application
GSM/CDMA/PCS/3G/4G/WLAN system
Point-to-multipoint system
Advanced connection kit
1x CW-BL2.4G500W-NM outdoor antenna
Antenna Installation Instructions
1. Install as the picture below
2. Installation Steps
1. Place the M6 U-shape screw through the holes on the clamps to mount the antenna to the pole whose outer diameter is ¢35~¢50mm.Then put on the flat washer,the spring washer and twist all the nuts.
2.There should be at least three meters between the ground or floor and the antenna above.No huge building or metal object or any other obstacle or shelter nearby.
3.Adjust the mounting height of the antenna to the proper position to receive the best signal,then seal all the connections.
4.Please pay attention to lightning protection.
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.
Feature:
- Exquisite appearance
- Good impact resistance,waterproofing and anti-corrosion ability
- Full day working
- Optimized dimension
- High gain,low standing wave,strong anti-interference ability
Application
GSM/CDMA/PCS/3G/4G/WLAN system
Point-to-multipoint system
A. Electrical Characteristics Working | |
Frequency | 2400-2500MHz |
S.W.R | <2.0 |
Typical Antenna Gain | 10dBi |
Polarization | Vertical |
Impedance | 50 Ohm |
B. Material | |
Marerial of Plastic | GFRP |
Connector Type | N Male |
C. Environmental | |
Operation Temperature | - 45 ~ + 85 |
Storage Temperature | - 45 ~ + 85 |
Advanced connection kit
1x CW-BL2.4G500W-NM outdoor antenna
Antenna Installation Instructions
1. Install as the picture below
2. Installation Steps
1. Place the M6 U-shape screw through the holes on the clamps to mount the antenna to the pole whose outer diameter is ¢35~¢50mm.Then put on the flat washer,the spring washer and twist all the nuts.
2.There should be at least three meters between the ground or floor and the antenna above.No huge building or metal object or any other obstacle or shelter nearby.
3.Adjust the mounting height of the antenna to the proper position to receive the best signal,then seal all the connections.
4.Please pay attention to lightning protection.
About us
Our Service:
♦ Test process : every items will be testing before shipping, to make sure the quality.
♦ Short leading time: 1-2.5 working days for samples or small order, 10-15 working days for bulk order.
♦ One year warranty: for you without trouble of after-sales maintenance.
♦ Quality Guarantee: Return rate is only 0.001.
♦ Support small orders: help your business from small to big.
♦ OEM & ODM are welcome.