High Quality 75dB GSM WCDMA Dual Band Mobile Signal Repeater

High Quality 75db GSM WCDMA dual band Mobile Signal RepeaterCertification CE0700 and RoHS What is a signal booster/repeater?A signal booster/repeater is a wireless signal relay transmission device  that helps to extend the cellular coverage footprint in areas of weak or poor coverage.Description:The booster s

Featured Products

High Quality 75db GSM WCDMA dual band Mobile Signal Repeater
Certification CE0700 and RoHS
 
What is a signal booster/repeater?
A signal booster/repeater is a wireless signal relay transmission device  that helps to extend the cellular coverage footprint in areas of weak or poor coverage.

Description:
The booster system series are designed for indoor signal coverage solution. Such as the bookstore, the restaurant, the coffee shop, the KTV, the bar, the parking pot, the super market,office,building...

It can support any dual band system of CDMA450,TETRA,CDMA,IDEN,EGSM,GSM,DCS, PCS,WCDMA,AWS,LTE.

The repeater improves indoor cellphone coverage by capturing and repeating the outside signal, bringing it into the building and enhancing it.You can get a better call experience and faster data download speed,while can save your phone battery life.

Coverage:
2500sq. M coverage.

Features:
1. Elegant and Compact design,good isolation and heat dissipation for long time operation.
2. Built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
3. 31dB MGC(Manual gain control) 1dB one step available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.
4. Limit output power for both uplink and downlink to avoid deep self-oscillations from jamming the towers, saving your trouble from operators.
5. Wide input power range,low power consumption.
6. With good IMD3,it can have more antennas for covering without affect towers.
7. Intermediate IF SAW filter technology,good out of band rejection,amplify only specific your required signals and reject all the others.
8. Output power can be from 10dbm to 30dbm and gain can be 60db to 85db,band can be full band,band selective or industrial standard.

RF Repeater Typical Application:
High Quality 75dB GSM WCDMA Dual Band Mobile Signal Repeater


Specifications:
RF Specifications
ItemsSpecifications
UplinkDownlink
Frequency RangeCDMA450452.5 ~ 457.5MHz462.5 ~ 467.5MHz
CDMA850 or LTE824 ~ 849MHz869 ~ 894MHz
GSM900 or LTE890 ~ 915 MHz935 ~ 960 MHz
EGSM900 or LTE880 ~ 915 MHz925 ~ 960 MHz
DCS1800 or LTE1710 ~ 1785 MHz1805 ~ 1880 MHz
PCS1800 or LTE1850 ~ 1910 MHz1930 ~ 1990 MHz
WCDMA2100  or LTE1920 ~ 1980 MHz2110 ~ 2170 MHz
AWS2100 or LTE1710 ~ 1755 MHz2110 ~ 2155 MHz
LTE698 ~ 716MHz728 ~ 746MHz
746 ~ 757MHz776 ~ 787MHz
791 ~ 821MHz832 ~ 862MHz
2500 ~ 2570 MHz2620 ~ 2690 MHz
as developed
IDEN800806MHz ~ 821MHz85lMHz ~ 866MHz
TETRA380 ~ 385MHz
 (or customized)
390 ~ 395MHz
 (or customized)
GainET-CR23D-F≥ 70dB≥ 75dB
Output powerET-CR23D-F≥ 17dBm≥ 23dBm
Band width Wide Band
MGC ( Step Attenuation )≥ 31dB / 1dB step
Automatic Level Control                              ≥ 31dB
Gain Flatness≤3-5dB(P-P) depend on the frequency and bandwidth
Noise Figure≤6dB
VSWR≤1.6
Group Delay≤6μs
Frequency stability≤0.01ppm
Spurious Emission &                                                   Output inter-modulationGSM Meet ETSI TS 151 026 V6.1.0
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 )
CDMA Meet IS95 & CDMA2000
MTBF>50000 hours
Power Consumption< 25W
Power SupplyInput AC90~264V,output DC9V / 5A
Impedance 50 ohm
Mechanical Specifications
I /O PortN-Female
Operating Temperature-25ºC~+55ºC
Environment ConditionsIP40
Dimensions270x240x55mm/10.6x9.4x2.2inch
Weight≤ 4.5Kg

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours