30dBm 2g 3G Signal Repeater GSM 850MHz/Aws 1700MHz/PCS 1900 MHz Mobile Network Tri Band Signal Booster
Model:
GW-23CPA, 23dBm
GW-27CPA, 27dBm
GW-30CPA, 30dBm
Tri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to the BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 5000~20000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
Model:
GW-23CPA, 23dBm
GW-27CPA, 27dBm
GW-30CPA, 30dBm
Tri-Band Signal Booster series is an ideal solution for three wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G&4G wireless connectivity. It is connected via coaxial cable to Tri-Band Donor Antenna and Service Antenna, Tri-Band Donor Antenna is placed outside the building where it has easy access to the BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
Features:
1. Cost-effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extension of the signal of the base station. Optimization of the quality of the signal and source
3. Cover about 5000~20000m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wideband signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc
Recommended Accessories:
1)Donor antenna: Log Periodic Antenna (9dBi, 806-960/1710-2700MHz)
2)Service antenna: Omni Ceiling Antenna (3dBi, 806-960/1710-2700MHz)
3)5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage of fill signal blind area where the signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop. Etc.
FrequencyRange | Uplink | Downlink | ||
GSM850+AWS1700+PCS1900 | 824 - 849MHz 1710 - 1755MHz 1850- 1915MHz | 869- 894MHz 2110 - 2155MHz 1930- 1995MHz | ||
Max. Gain | 70dB | 75dB | ||
Max. Output Power | 27dBm±2 | 30dBm | ||
Bandwidth | Wide Band | |||
Manual Gain Control | 31dB / 1dB Step | |||
Automatic Gain Control | >20dB | |||
Ripple in-band | ≤6dB | |||
Return loss | ≤ -10dB | |||
Noise Figure | ≤ 6dB | |||
Spurious Emission &Intermodulation | 9KHz~1GHz | ≤ -36dBm | ||
1~12.75GHz | ≤ -30dBm | |||
WCDMA | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) | ||
Modulation Accuracy | ≤ 12.5% | |||
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 | |||
Time Delay | ≤ 1.5 μs | |||
Frequency stability | ≤ 0.01ppm | |||
MTBF | > 50000 hours | |||
Impedance | 50 ohm | |||
Power Supply | AC100-240V | |||
Power LED | Power Indicator | |||
ALC LED | Orange @ ALC 1~5dB, Red @ ALC 15dB~20dB, LED off after 5 seconds red color | |||
Mechanical Specification | ||||
RF Connector | N-Female | |||
Switch | Power Switch\Manual Gain Control Switch | |||
Cooling | Heatsink Convection cooling | |||
Humidity | < 90% | |||
Operating Temperature | -10c~55.c | |||
Environment Conditions | IP40 | |||
Installation Type | Wall Installation | |||
Size | 250*380*104mm | |||
Weight | < 10Kg |