37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)

37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)Model:33dBm, GW-33CP37dBm, GW-37CP40dBm, GW-40CP43dBm, GW-43CPThe Dual Band RF Repeater (RFR) is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Bas

Featured Products

37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)

Model:
33dBm, GW-33CP
37dBm, GW-37CP
40dBm, GW-40CP
43dBm, GW-43CP

The Dual Band RF Repeater (RFR) is the kind of repeater used most frequently. It has a simple structure to transparently convey and amplify the wireless signal (at the same frequency) between the BTS (Base Transceiver Station) and mobiles in Dual wireless network.
The Dual Band RFR is working as a relay between the BTS and mobiles. It picks up the signal from the BTS via the Donor Antenna, linearly amplifies the signal and then retransmits it via the Coverage Antenna (or the Indoor Signal Distribution System) to the weak/blind coverage area. And the mobile signal is also amplified and retransmitted to the BTS via the opposite direction.

Features:
* Aluminum-alloy casing with IP65 protection has high resistance to dust, water and corroding;
* Highly selective channel selector can process multiple channels simultaneously;
* No interference to BTS by adopting linear amplifier with high gain and low noise;
* Adopting filter with highly selectivity and low insertion loss eliminates interference between uplink and downlink;
* USB port provides a link to a notebook for local supervision or to the built-in wireless modem to communicate with the NMS (Network Management System) that can remotely supervise repeater's working status and download operational parameters to the repeater.

The RF Repeater is mainly applicable to such case:
*The repeater can find an installation place which can receive pure BTS signal at strong enough level and can meet the requirement of isolation to avoid self-oscillation;
*And the distance between the BTS and the area to be covered is 2km around.

In comparison with FSR (frequency shift repeater) and FOR (fiber optic repeater), the RFR has the following benefits and disadvantages:
PRO:
Easy to build the installation site;
Lower cost of equipment and site-building.

Con:
*Inappropriate installation may cause self-oscillation;
*The Coverage Antenna shall face against the Donor Antenna, which limits the coverage angle;
* High signal noise may be introduced since the Donor Antenna picks up signal from the air;
*The repeater shall be installed within the coverage of BTS.

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc
Outdoor: Airports, tourism regions, golf courses, tunnels, factories, mining districts, villages, highways
  CDMA 800/GSM 850PCS1900
Working Frequency (customizable)Uplink (MHz)824- 8491850- 1910
Downlink (MHz)869- 8941930- 1990
Working Bandwidth25 MHz60 MHz
Max. Input Level (Non-Destructive)-10dBm
Max. Output Power (customizable)33-43dBm
Max. Gain≥ 90dB
Gain Adjustment Range1~31 dB @ step of 1dB
Voltage Standing Wave Ratio (VSWR)< 1.5
Spurious EmissionWithin working band≤ -15dBm/30kHz
Out of working band
(Δf > 2.5MHz)
9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHz
Noise Figure≤ 5dB
In-Band Ripple≤ 3dB
Third-Order Intermodulation≤ -45dBc/30kHz (measured under rated output power)
System Delay≤ 5.0μSec
I/O Impedance50Ω
RF ConnectorN-Type (Female) / changeable / bottom of casing
Temperature RangeOperation: -25°C ~ +55°C / Storage: -30°C ~ +60°C
Relative Humidity Range≤ 95% (non condensing)
Power Supply (customizable)DC -48V / AC 220V, 50/60Hz / AC 110V, 50/60Hz
Power Consumption≤ 250W
Backup Power Supply (optional)4 hours
Casing LevelIP65
Dimensions550mm X 440mm X 235mm
Weight50kg
NMS Monitoring Function (optional)Real-time alarm for door status, temperature, power supply, LNA, VSWR, self-oscillation, etc. Remote control such as turn on/off, increasing/decreasing output power, etc. Real-time status for output/input power, UL/DL gain, all status of repeater etc. 

37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)
37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)
37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)
37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)37dBm GSM 850 PCS1900 Mobile Repeater Signal Amplifier (GW-37CP)

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours