20dBm PCS 1900 Fixed Band Selective Mobile Signal Repeater Signal Booster

20dBm PCS 1900 Fixed Band Selective booster/signal moblie Repeater (GW-20PS)Model: GW-20PSFeatures:1. Cost effective solution for weak signal zones, reduce drop/off calls.2. Compact size, low power consumption, easy installation, great cover.3. Cover about 500~2000m² without block or obstruct.4. High linear design, ALC func

Featured Products

20dBm PCS 1900 Fixed Band Selective booster/signal moblie Repeater (GW-20PS)


Model: GW-20PS


Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
3. Cover about 500~2000m² without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.
5. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible,  Support any cellular devices (voice & data & video)
6. Wide band signal booster, Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.
or Customize selective band booster.
7. Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater;
Such as, CDMA450, LTE800, iDEN, CDMA800,GSM,EGSM,AWS1700, DCS, PCS,WCDMA, LTE2600.
8. Expansion and extention of the signal of base station.
Optimization of the quality of the signal and source.
Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

Advantages:
Smart Function, Intelligent digital mode setting.
Smart function called which can be activated via the front digital panel.
users can adjust gain and choose working band by LED digital panel, This smart function is easier than DIP Switch, 
will set up parameters more fast and more accurate,
It is a simple, safe and effective way.
 
 
Description:

Indoor Pico Repeater (Signal Booster) series is an ideal solution for small/medium businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has easy access to a BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.
 
Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, etc.
 
 
 
Specification:
Frequency RangeUplinkDownlink
PCS 19001850- 1910MHz1930- 1990MHz
Max. Gain65dB70dB
Max. Output Power17dBm20dBm
Band widthCustomized
Manual Gain Control31dB     / 1dB Step
Automatic Level Control>25dB
Ripple in-band≤3dB
Return loss≤ -10dB
Noise Figure≤ 6dB
Spurious Emission9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
Third-Order Intermodulation≤ -40dBc
Time Delay≤ 1.5 μs
VSWR≤ 2.0
Frequency stability≤ 0.01ppm
MTBF> 50000 hours
Power SupplyAC100-240V,DC9V/5A
Power LEDPower indicator
Alarm LEDRedSelf-oscillation or High Power
GreenStandard
Mechanical Specification
RF ConnectorN-Female
SwitchPower Switch
CoolingHeatsink Convection cooling
Impedance50 ohm
Humidity< 90%
Operating Temperature-25°C ~ +55°C
Environment ConditionsIP40
Size268mm*58mm*189mm
Weight<4Kg
 

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)


Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes in the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
E. After installing the booster as described above, power on the booster to check the operation status.


Connection:
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN connected with Power adaptor.

20dBm PCS 1900 Fixed Band Selective Mobile Signal Repeater Signal Booster

FAQ

Q1.Payment Method

T/T, Western Union, Paypal, and Credit Card are available,
and we suggest paying by Alibaba Trade Assurance, the most favor, and security method.
*Other methods please
us with more details.

Q2.Delivery Date&Lead Time

QuantityLead timeDelivery to American/Middle East/Asia/Europe
<20 pcs3-5 business days3-7 business days by DHL
5-7 business days by FedEx/UPS
20-100 pcs7-15 business days
>100 pcs15-24 business days
* it to get the sample.

Q3. Can I customize frequencies?

Yes, we can customize 2G/3G/4G/5G/GSM/CDMA/DCS/AWS/PCS/WCDMA/LTE,etc.

Q4. What should I do if I don't know about frequency in my country?

Please feel free to us with your inquiry, we will find the frequency you need and address your problems. 

Other Signal Repeater

More signal repeater please it!
20dBm PCS 1900 Fixed Band Selective Mobile Signal Repeater Signal Booster
 

Company Profile



20dBm PCS 1900 Fixed Band Selective Mobile Signal Repeater Signal Booster

 


20dBm PCS 1900 Fixed Band Selective Mobile Signal Repeater Signal Booster



 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours